Skip to content

Raspberry Pi Pico W

Original price 143 kr - Original price 143 kr
Original price
143 kr
143 kr - 143 kr
Current price 143 kr
in stock, ready to be shipped
  • American Express
  • Apple Pay
  • Mastercard
  • PayPal
  • Visa


Raspberry Pi Pico W comes with the on-board wireless chip to support 2.4GHz Single-Band 802.11n. The board dimensions are the same as of the Raspberry Pi Pico. The Pico W has the Infineon CYW43439 chip and an on-board ARACON licensed antenna.

Wireless Specifications

  • Infineon CYW43439 Chip
  • WPA3
  • On-board ABRACON licensed antenna
  • SPI connection between RP2040 and wireless interface
  • Single-band 2.4 GHz 802.11n wireless
  • Bluetooth BT 5.2 Support: Compatible with Bluetooth Classic and Bluetooth LE central and Peripheral roles
  • Supports up to 4 clients through the soft access point

Build a Wireless Weather Station with Raspberry Pi Pico W

Hack Your Garage Door with Raspberry Pi Pico W

Adding Raspberry Pi Pico W to ESPHome

Setting Up MQTT with Raspberry Pi Pico W

Raspberry Pi Pico W Web Server with MicroPython

Controller Board Specifications

  • Microcontroller Chip: RP2040
  • Processor: ARM Cortex-M0 Dual Core
  • QSPI Flash: 2MB
  • RAM: 264kB
  • Clock Speed: Up to 133 MHz
  • Input Voltage: 1.8V ~ 5.5V DC
  • USB: 1x USB 1.1 controller and PHY (Device and HOST support)
  • GPIO Pins: 26 Multifunctional pins (3x analogue input pins)
  • PIO: 8x programmable I/O support custom peripherals
  • Controller Pins: 2x SPI, 2x UART, 2x I2C, and 16x PWM Channels
  • Soldering: castellated module allows direct soldering to the carrier board (only Pico and Pico W versions – H and WH versions do not have this feature)
  • Temperature sensor, dormant mode, low-power sleep mode, and Drag & Drop
  • Dimensions: 21mm x 51mm
  • On-chip accelerated integer and floating-point libraries
  • programming through storage USB

Pin Definition Dimensions

Important Notes

  • For optimal wireless performance, make sure that there is no metal near or under the antenna. You can improve the bandwidth by adding grounded metal to the sides of the antenna.
  • The same pin on the RP2040 is shared by IRQ and CYW43439 DIN/DOUT. This means that IRQs can be checked when there is no SPI transaction in progress.
  • Some wireless interface pins are shred because of the pin limitations. VSYS monitor and CLK are shared and this is why the ADC can read VSYS only where not SPI transaction is in progress.

Items Included

  • Raspberry Pi Pico W


Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare