2.13 Inch E Ink Display HAT for Raspberry Pi 212x104p SPI Interface 3 Color

Getting Started with 2.13-inch E-Paper HAT

The 2.13-inch e-Ink Display HAT for Raspberry Pi has a resolution of 212x104 pixels. This display HAT supports SPI interface and it displays content in 3 colors, Red, White, and Black. The 2.13-inch e-Paper HAT contains an embedded controller.

Paper Like Experience – Your Eyes Feel Less Stress

Apart from Raspberry Pi microcontrollers, you can also use this e-Ink HAT with NVIDIA Jetson Nano. The e-Ink HAT for Raspberry Pi is ultra-low-power hardware. It can display the content for a long time without consuming power. E-Ink HAT only needs power when it has to upload new content to display. The view angle is 170^o so this display HAT is ideal for shelf-labels and industrial instruments.

Features of 2.13-inch e-Ink Display HAT

• Brand: Waveshare 
• The display HAT has preserved solder pads for SPI to connect Arduino or Nucleo
• Ultra-Low-Power display with no backlight
• Power is only needed when refreshing and uploading new content to display
• Standard Raspberry Pi 40-Pin compatible extension header that works with Raspberry Pi and NVIDIA Jetson Nano
• 3V/5V MCUs – Onboard voltage translator

SPI Control Interface Onboard Supports Controller Boards such as Raspberry Pi, Jetson Nano, NVIDIA, STM32…

Specifications of 2.13-inch e-Ink Display HAT 

• Operating Voltage: 3.3V ~ 5V
• 3-Wire and 4-Wire SPI interface
• Dot Pitch: 0.229 x 0.228
• 212x104 pixels resolution
  
• 3 Color Display: White, Black, Red
• Grey Level 2
• Full Refresh Time: 15 seconds
• Standby Power: Less than 0.017mW
• 170^o View Angle
• Weighs only 21 grams | 0.021 Kg
• Dimensions (Display): 2.371cm x 4.855cm / 23.71mm x 48.55mm
• Outline Dimensions: 6.5cm x 3.02cm / 65mm x 30.2mm

Note

• The 2.13-inch e-Ink Display HAT has a partial refresh time of approximately 0.3 seconds

Items Included

• 1x 1.13-inch e-Ink HAT
• 1x 20cm 8Pin PH2.0
• 2x Screws

Raspberry Pi is NOT included.