Power over Ethernet (PoE) HAT for Raspberry Pi 3B+ / 4B | 802.3af PoE Network

The PoE HAT for Raspberry Pi has been designed to work with 802.3af Power-Sourcing equipment. The Power over Ethernet HAT for Raspberry Pi works with Raspberry Pi 4B and Raspberry Pi 3B+. The hardware features a small form factor that is easy to use in order to power the PoE enabled network for compatible Raspberry Pi boards. The PoE HAT for Raspberry Pi comes with a 25mm x 25mm brushless cooling fan.

Specifications of Power over Ethernet (PoE) HAT for Raspberry Pi 3B+ / 4B

• PoE Network Compatibility: Works with 802.3af Power-Sourcing equipment
• Fully isolated switched-mode power supply
• Compatible with 37V to 57V DC Class 2 device
• 5V/2.5A DC output voltage
• 25mm x 25mm brushless CPU cooling fan
• Fan control

Hardware Required for Power over Ethernet (PoE) HAT for Raspberry Pi 3B+ / 4B

• Raspberry pi Board (Raspberry Pi 4B or 3B+ | NOT Included in this offer)
• An Ethernet Cable (NOT included in this offer)
• Power-sourcing equipment for 802.3af PoE Network (NOT included in this offer)

Connecting the Power over Ethernet (PoE) HAT for Raspberry Pi with the Compatible Microcontroller

• The first step is to fix the spacers to the corners of the board (The package includes the spacers)
• Use 2x (40 + 4) 0.1-inch header on Raspberry Pi to connect it with the PoE
• Use the network connector (RJ45) to power the Raspberry Pi board

Disconnecting the Power over Ethernet (PoE) HAT for Raspberry Pi

DO NOT pull up from one end while keeping the other end attached. Make sure to pull it horizontally so that all pins are detached at once. You can do it by keeping the connector straight and pulling it off.

Advantages of Power over Ethernet (PoE) HAT for Raspberry Pi

• No modifications are required on the Raspberry Pi board. Just make sure to update Raspberry Pi software to use all the available functions
• The 25mm x 25mm brushed CPU cooling fan is easily controlled via the I2C interface
• The cooling fan is capable of detecting the temperature. It turns ON or OFF automatically in accordance with the temperature

Safety Precautions for Power over Ethernet (PoE) HAT for Raspberry Pi

• Always use the compatible Power-Sourcing equipment (802.3af PoE Network)
• Always use only the recommended external supply that is safe and reliable for Raspberry Pi (depending on the country / regional standards)
• NEVER cover the PoE HAT because it requires proper ventilation for optimal performance
• Always place the Power over Ethernet HAT on a non-conductive flat surface
• Make sure that no conductive surface is in contact with the PoE HAT
• Never insert anything into the cooling fan
• DO NOT block or obstruct the CPU cooling fan in any case
• Keep the PoE HAT away from water and moisture
• Try your best to use the PoE HAT at normal room temperature for optimal performance
• Take all necessary precautions when repairing connectors, handling machine or electrical damage, and printing circuit board

Form Factor of Power over Ethernet (PoE) HAT for Raspberry Pi

• Weight: 0.04 kg | 40 grams
• Dimensions: 65mm x 56.5mm | 6.5cm x 5.65cm

Items Included

• 1x Power over Ethernet (PoE) HAT for Raspberry Pi
• 1x Raspberry Pi Screw pack (4pcs)

Note: The hardware in the images is just for demonstration purposes. This offer DOES NOT include Raspberry Pi, Ethernet Cable, or Power-Sourcing Equipment.