NanoPi R1

If you need a low-budget microcontroller to work on IoT applications then you need to consider NanoPi R1. This Single Board Computer contains a 512MB DDR3 RAM, a couple of Ethernet Ports, 2x USB 2.0 Ports, and a WiFi / Bluetooth Module. NanoPi R1 also has a 3G/4G supportive TTC Serial Port. As far as OS and software compatibility is concerned, NanoPi R1 works with UbuntuCore, Linux Mainline Kernel (4.14), and OpenWrt. The SBC uses the MicroUSB port to receive 5V power input.

Specs of NanoPi R1

• Processor: Allwinner H3 Cortex-A7 Quad-Core / frequency reaches up to 1.2GHz
• Memory: 512MB DDR3 RAM (16-bit)
• 1x eMMC Socket (There is NO eMMC Module)
• 1x MicroSD Slot (supports external storage of up to 128GB)
• WiFi: AP6212 – 802.11b/g/n WiFi Module
• 1x 10/100M Ethernet Port
• 1x 10/100/1000M Ethernet Port
• Bluetooth 4.0 (Dual-Mode)
• SMA antenna interface
• 1x OTG MicroUSB 2.0 (supports 5V power input)
• 2x HOST USB 2.0 (Type-A)
• Serial Debug Port: 2.54mm Pitch 3-Pin Header
• 2.54mm Pitch UART connector (4-Pin)
• 1x Status / Power indicating LED (Red Light)
• 2x LEDs (Green Light)
• 1x RTC Battery / 3.0V~3.6V input voltage compatible
• 1x User Button
• DC 5V/2A Power Input compatible (through OTG MicroUSB)
• Operating Temperature: -20℃ to 70℃
• Supports OpenWrt and eFlasher
• Compatible with FriendlyCore-based UbuntuCore 16.04
• Compatible with Linux-4.14-LTS and U-boot-2017.11 Kernel Versions
• NanoPi R1 has a 6-Layer Board
• Weight: 33 grams
• Dimensions: 60mm x 50.5mm / 6cm x 5.05cm

Description

NanoPi R1 comes with some considerable connectivity features you need for your IoT applications. In addition, it is good to see extended OS and software compatibility to support your projects requiring a variety of features.