EnglishSvenska

NanoPi M4V2 (4GB)

by Friendly Elec
1 178 kr 942 kr

The NanoPi M4 microcontroller now comes with an upgrade, NanoPi M4V2. Most of the hardware specifications and software compatibilities are the same on both Single Board Computers but the M4V2 has a 4GB LPDDR4 (dual-channel) RAM instead of the 2GB DDR3 on the previous version. NanoPi M4V2 also has two new buttons including a Power Button and a Recovery Button. In addition, the M4V2 microcontroller has RK808-D PMIC Power Management Unit that supports RTC Wake-Up, System Sleep Mode, and Software Power-Down. It also has the cooperated independent DC/DC and DVFS enabling features. The form factor of this microcontroller resembles the form factor and interfaces of Raspberry Pi 3 Model B+. NanoPi M4V2 is an 8.5cm x 6.6cm SBC that contains 4x USB 3.0 (Type-A), 2.4G and 5G compatible dual-band WiFi / Bluetooth module, Gbps Ethernet port, HDMI 2.0 (Type-A), 3.5mm Audio Jack, Type-C Port, and 40-Pin GPIO that is compatible with Raspberry Pi. There is an eMMC socket on NanoPi M4V2 but it does not have an eMMC module. You could boot the DDR4 RAM with the external eMMC module. The other option to boot the 4GB RAM is the TF Card. NanoPi M4V2 microcontroller also features a dual MIPI-CSI camera interface, 2x PCIe, an RTC port, and a USB 2.0.

Specs of NanoPi M4V2

  • NanoPi M4V2 microcontroller is based on Rockchip RK3399
  • 64-Bit Cortex-A72 (Dual-Core) up to 2.0GHz and Cortex-A53 (Quad-Core) up to 1.5GHz
  • Graphics Processing Unit: Mali-T864 GPU / Supports DX11, AFBC, OpenCL, and OpenGL ES 1.1/2.0/3.0/3.1
  • Vision Processing Unit: 4K VP9 / Dual VOP / H265/H264 @60fps decoding / 10-bits 4K support
  • Memory: 4GB dual-channel LPDDR4 RAM
  • Power Management Unit: PMIC RK808-D / supports RTC Wake-Up, System Sleep Mode, and Software Power-Down / cooperated independent DC/DC / DVFS enabling
  • Micro SD Slot for external storage – supports a maximum of 128GB
  • eMMC Socket (NanoPi M4V2 SBC DOES NOT come with the eMMC module)
  • WiFi / Bluetooth Combo Module / 802.11 a/b/g/n/ac and BT 4.1
  • Gpbs Native Ethernet
  • Dual-Antenna Interface
  • 2x Antenna Connectors (IPX)
  • 2x2 MIMO
  • Audio output support via 3.5mm headphone jack (dual-channel)
  • Audio input support via the microphone interface
  • 4-Lane MIPI-CSI camera interface support video input
  • Simultaneous video input supported via dual-camera interface
  • Dual ISP / 13MPix/sec. (max.)
  • 4/2.2 HDCP video output support
  • 1x 4-Lane MIPI-DSI supports video output
  • 1x 2.0a HDMI supports video output (4K @60Hz compatible)
  • 4x USB 3.0 (Type-A)
  • 1x USB Type-C (Supports OTG USB 2.0 and Power Input)
  • 2x USB HOST included in GPIO2 (2.54mm Pitch Pin-Header)
  • GPIO1: Raspberry Pi compatible 2.54mm Pitch 40-Pin Header
  • 1x SPI 3V
  • 1x SPDIF_TX
  • 3x I2C 3V/1.8V
  • 1x UART 3V
  • 1x I2S 8-channel 1.8V
  • GPIO2: 2.54mm Pitch 24-Pin Header
  • 1x PWM
  • 2x PCIe
  • 2x HOST USB 2.0 independent / native interfaces
  • 1x Power indicating LED (Red Light)
  • 1x GPIO Controlled LED (Green Light)
  • 1x Recovery Key
  • 1x Power Key
  • Input connector 2-Pin 1.27/1.25mm for RTC Battery
  • Operating Temperature: -20℃ to 70℃
  • Compatible with DC 5V/3A input power supply
  • Supports Android 8.1 / Lubuntu 16.04 (32-bit) / FriendlyCore 18.04 (64-bit) / FriendlyDesktop 18.04 (64-bit)
  • Compatible with Linux-4.4-LTS and U-boot-2014.10 Kernel Versions
  • NanoPi M4V2 microcontroller has 8-Layer Board
  • The weight of NanoPi M4V2 is 50.62 grams
  • Outline dimensions: 8.5cm x 5.6cm / 85mm x 56mm

Description of NanoPi M4V2 with 4GB RAM

A couple of PCIe interfaces on NanoPi M4 expand the functionality of 1G/10Ggbs Ethernet, SATA, SSD storage, USB 3.0/3.1 and WiFi. If you are working on applications involving AI, robots, deep leaning, industrial cameras, machine learning, advertisement machines, industrial controls, blockchain, or game machines, then the hardware and software specs of NanoPi M4V2 are fairly suitable.