EnglishSvenska

4x SATA HAT for NanoPi M4

by Friendly Elec
421 kr 337 kr

The NanoPi 4x SATA HAT is an exclusive release from Friendly Elec that lets you expand the functionality of NanoPi M4 microcontrollers. This 4x SATA HAT for NanoPi M4 supports three different communications rates:

  1. 1.5Gbps
  2. 3Gbps
  3. 6Gbps

The 4-Pin power connector on NanoPi 4x SATA HAT enables it to carry large current while supporting 12V as well as 5V outputs. There are 4x LEDs onboard to indicate the status of the ports, (one for each SATA port). The 5566-04A connector supports 12V input. In addition, there is a DC-Jack that is also compatible with 12V input. The 4x SATA HAT for NanoPi M4 contains a DC/DC regulator (12V~5V) that has the capacity to generate an output current of maximum 8A. There are 2x HOST SUB 2.0 connectors (4-Pin PH2.0), a PowerKey Button, and a PowerKey Jumper on this SATA HAT.  

Specifications of 4x SATA HAT for NanoPi M4

  • 88SE9215 (Four-Port) Marvell SATA I/O Controller
  • Number of SATA Ports: 4
  • 6Gbs, 3Gbps, and 1.5Gbps communication rates supported
  • 1x 4-Pin (5V / 12V output support) Power Connector / Designed to carry large currents
  • LEDs: 4x Status indicating LEDs (one for each SATA port)
  • 12V input power supported by 5.5mm x 2.1mm DC-Jack
  • 12V input power supported by a 5566-04A connector
  • DC/DC regulator (12V~5V) / Capacity to generate an output current of maximum 8A
  • 1x PowerKey Button
  • 1x PowerKey Jumper
  • 12V output modulator PWM1
  • 1x Fan Connector 2-Pin PH2.0
  • 2x HOST USB 2.0 (4-Pin / PH2.0)
  • Compatible with 12V/2A DC power input (sufficient of 1x 3.5-inch Hard Disk or 4x 2.5-inch Hard Disks)
  • FirendlyCore 18.04 (64-bit) compatible
  • FriendlyDesktop 18.04 (64-bit) compatible
  • Lubuntu 16.04 (32-bit) compatible
  • Linux-4.4-LTS Kernel Version supported
  • U-boot-2014.10 Kernel Version supported
  • Designed to work with NanoPi M4 microcontrollers
  • Weight: 33.48 grams
  • Dimensions: 65mm x 56mm / 6.5cm x 5.6cm

Description

You can mount a heatsink on 4x SATA HAT for NanoPi M4 by using just two nuts. In addition, the HAT allows you to connect a cooling fan by using the PH2.0 (2-Pin) connector. The NanoPi M4 does not need a separate power supply because it receives power from the 4x SATA HAT as soon as you connect the power adapter with the HAT.