Skip to content

MAX-7Q GNSS GPS HAT for Raspberry Pi and Jetson Nano – GLONASS SBAS QZSS Support

Sold out
Original price 351 kr - Original price 351 kr
Original price
351 kr
351 kr - 351 kr
Current price 351 kr
Availability:
Out of stock
  • American Express
  • Apple Pay
  • Mastercard
  • PayPal
  • Visa

Download User Guide and Resources for MAX-7Q GNSS HAT

This GNSS / GPS HAT features MAX-7Q and is compatible with Raspberry Pi and NVIDIA Jetson Nano Developer Kits. The MAX-7Q GNSS / GPS module supports, SBAS, QZSS, and GLONASS with accurate and fast positioning. The MAX-7Q GNSS / GPS HAT is a low-power consumption module with minor drifting. This Raspberry Pi and Jetson Nano HAT comes with anti-spoofing and anti-jamming features.

Features of MAX-7Q GNSS HAT for Raspberry Pi and Jetson Nano

  • Standard 40-PIN Raspberry Pi GPIO extension header – also works with NVIDIA Jetson Nano
  • Assisted GNSS (A-GNSS) – improved acquisition sensitivity and the fast first positioning
  • I2C and UART interface breakouts – connection with Host boards such as STM32 and Arduino
  • Supports GLONASS, GPS, QZSS, and SBAZ positioning systems
  • Anti-jamming and anti-spoofing with geo-fencing support
  • CP2102 onboard converter from USB to UART – supports serial debugging
  • U-Center support – easy configuration
  • I2C compliant DDC interface support – Maximum 400 KHz
  • Baudrate 9600 bps by default – Range from 4800 bps to 921600 bps
  • LED status indicator lights (x4)
  • Battery Holder onboard (Compatible with rechargeable ML1220 Cell) |supports preserving ephemeris information and hot starts (Battery cell is not included)
  • Development resources and user manual included with examples for Raspberry Pi, STM32, Jetson Nano, and Arduino

GNSS Specifications

  • 56x u-blox 7 engine channels | GPS/QZSS L1C/A, GLONASS L1 FDMA, SBAS (WAAS, EGNOS, MSAS)
  • Maximum Navigation Update Rate: 10Hz (GPS) | 10 Hz 9GLONASS)
  • Horizontal Positioning Accuracy: 2.5m CEP (GPS) | 4.0m CEP (GLONASS) | 2.0m CEP (SBAS)

Time to First Fix

  • Warm Start: 28 Seconds (GPS) | 25 Seconds (GLONASS)
  • Cold Start: 29 seconds (GPS) | 30 Seconds (GLONASS)
  • Aided Start: 5 Seconds (GPS)
  • Hot Start: 1 Second (GPS) | 1 Second (GLONASS)

Sensitivity

  • Re-Acquisition: -160 dBm (GPS) | -156 dBm (GLONASS)
  • Tracking & Navigation: -161 dBm (GPS) | -158 dBm (GLONASS)
  • Cold Start: -148 dBm (GPS) | -140 dBm (GLONASS)
  • Hot Start: -156 dBm (GPS) | -156 dBm (GLONASS)
  • Warm Start: -148 dBm (GPS) | -145 dBm (GLONASS)

PPS Accuracy

  • 99%: 60ns (GPS) | 100ns (GLONASS)
  • RMS: 30ns (GPS) | 50ns (GLONASS)

Other Specifications

  • Protocol: UBX, NMEA 0183 V 2.3 (Version 3.0), RTCM 2.3
  • Communication Interface: I2C (400 kHz Max.) | UART (4800 bps ~ 921600 bps | 9600 bps by default)
  • Power Supply: 5V Compatible
  • Module Current: 17.5 mA @ 3V (Tracking Status and Continue Mode)
  • Overall Current: < 37 mA @ 5V (Continue Mode)
  • Update Rate: Maximum 10 Hz | 1 Hz by Default
  • PPS Frequency: Configurable between 0.25 Hz and 10 MHz
  • Velocity Accuracy: 0.1 m/s.
  • Maximum Acceleration: 4g
  • Heading Accuracy: 0.5 Degree
  • Maximum Velocity: 500 m/s.
  • Maximum Altitude: 50000m
  • Operating Temperature: -40℃ ~ 85℃
  • Weight: 132 Grams
  • Dimensions: 65 mm x 30.5 mm | 6.5 cm x 3.05 cm

Applications of MAX-7Q Module

  • Industrial PDA
  • Fleet Management
  • GIS App
  • Asset Tracking
  • Security Systems

Components on Board

  • Voltage Translator TXS0108EPWR
  • MAX-7Q Module
  • Power Ship RT9193-33
  • RXD/TXD UART TX/RX Indicator
  • USB to UART Converter CP2102
  • PWR Power Indicator
  • GPIO Header 40-PIN
  • PPS GPS Status Indicator
  • USB to UART Port
  • I2C, UART Interface
  • UART Selection Jumper
  • GNSS Antenna Connector
  • Battery Holder

Items Included

  • MAX-7Q GNSS HAT (x1)
  • USB Cable (USB-A to Micro-B) (x1)
  • External GPS Antenna (x1)
  • Female Header 2x20 PIN (x1)
  • Raspberry Pi Screws (x2)

Please Note that this offer DOES NOT include Raspberry Pi or Jetson Nano

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
English