
Arduino UNO Rev3
Arduino UNO Rev3 Specifications
- ATmega328P microcontroller
- Flash Memory: 32KB
- SRAM: 2KB
- EEPROM: 1KB
- 5KB Flash Memory reserved for the bootloader
- Compatible with 5V operating voltage
- Input Voltage Range: 6V to 20V
- Arduino Recommended Voltage: 7V to 12V
- 14x GPIO pins
- 6x PWM Channels
- 6x Analog input pins
- Support 20mA DC per I/O pin
- Supports 50mA DC for each 3.3V pin
- 13x LEDs
Dimensions (L x W) |
68.6mm x 53.4mm |
Weight |
25g |
Arduino UNO Rev3 Description
You need to first go to the tool menu to access the IDE to initiate the Arduino UNO Rev 3 specs programming. You can easily program customized codes because the microcontroller supports customized coding owing to its pre-installed bootloader. It means that there is no need to search for the external programming sources or any additional programming hardware.
You may also bypass the bootloader if you want, with the help of Arduino ISP. The programming becomes easier due to ICSP. If you don’t an idea about the firmware source code then you must refer to the Arduino repository. It will help you to check DFU bootloader.
ADU programmer (Mac. Operating System) and FLIP programmer (Windows Operating System) help to load the firmware. DFU also supports Linux. You have the option to overwrite the DFU bootloader using an external ISP header and programmer.