Skip to content

2.13 inch Black and White SPI E-Ink Display 250x122p Raw E-Paper Panel

Original price 168 kr - Original price 168 kr
Original price
168 kr
168 kr - 168 kr
Current price 168 kr
  • American Express
  • Apple Pay
  • Mastercard
  • PayPal
  • Visa

Download 2.13 inch ePaper Data Sheet

Download 2.13 inch ePaper Specifications

This is a 2.13-inch E-Ink Display Panel. This E-Paper Raw Display is compatible with 4-Wire SPI and 3-Wire SPI communication interface. This Black & White E-Paper has a 170o Wide View Angle. The display resolution is 250 x 122 pixels and it supports partial refresh. Since it is an ultra-low power consumption display, it is ideal for industrial instruments and shelf labeling. The content stays on the display for a long time without consuming power.

Resembles Writing on a Paper - Puts Less Stress on the Eye

Features of 2.13-inch Raw E-Paper Display Panel

  • No Backlight – the content stays on the panel for a long time without requiring power
  • Ultra-Low Power Consumption
  • Supports SPI (3-Wire and 4-Wire) communication interface
  • Partial refresh support
  • Compatible with most SPI compatible boards including Raspberry Pi, Arduino, NVIDIA Jetson Nano, and STM32, etc.
SPI Control Interface Support
Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32…

Specifications of 2.13-inch Raw E-Paper Display Panel

  • Operating Voltage: 3.3V
  • Resolution: 250 x 122 pixels
  • Dimensions of the Display Area: 23.71mm x 48.55mm | 2.371cm x 4.855cm
  • Dot Pitch: 0.194 x 0.194
  • View Angle: 170o
  • Communication Interface: 4-Wire and 3-Wire SPI
  • Gray Level: 2
  • Display Colours: Black & White
  • Partial Refresh Time: 0.3 seconds
  • Full Refresh Time: 2 seconds
  • Refresh Power: 26.4mW (Typical)
  • Standby Power: Less than 0.017mW
  • Weight: 3 Grams
  • Edge to Edge Dimensions: 29.2mm x 59.2mm x 1.05mm | 2.92cm x 5.92cm x 0.105cm

Items Included

  • E-Paper Display 2.13-inch (x1)

Note: This is only the display panel. E-Paper HAT is NOT included.  

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare