EnglishSvenska

NanoPi NEO4

by Friendly Elec
842 kr 674 kr

NanoPi NEO4 uses the Rockchip RK3399 SoC and the processor is backed by the big.Little technology. This microcontroller measures 6cm x 4.5cm and the board contains 1GB DDR3-1866 RAM, Mali-T864 GPU, MIPI-CSI, eMMC Socket, USB 3.0, USB 2.0, PCIe, GbE, HDMI, SPI, and 40-Pin GPIO (Raspberry Pi compatible). The CPU and GPU on NanoPi NEO4 are the same as of NanoPi M4 microcontroller. NanoPi NEO4 features an 8-layer board and it weighs 30.25 grams.

Specifications of NanoPi NEO4 with 1GB RAM

  • NanoPi NEO4 microcontroller is based on Rockchip RK3399
  • 64-Bit Cortex-A72 (Dual-Core) up to 2.0GHz and Cortex-A53 (Quad-Core) up to 1.5GHz
  • Graphics Processing Unit: Mali-T864 GPU / Supports DX11, AFBC, OpenCL, and OpenGL ES 1.1/2.0/3.0/3.1
  • Vision Processing Unit: 4K VP9 / Dual VOP / H265/H264 @60fps decoding / 10-bits 4K support
  • Memory: 1GB DDR3-1866 RAM
  • Micro SD Slot for external storage – supports a maximum of 128GB
  • eMMC Socket (NanoPi NEO4 SBC DOES NOT come with the eMMC module)
  • WiFi / Bluetooth Combo Module / 802.11 a/b/g/n/ac and BT 4.0
  • Gpbs Native Ethernet
  • 1x Antenna Connectors (IPX)
  • 4-Lane MIPI-CSI (up to 13 Mpix/sec.) Video input support
  • HDCP 1.4/2.2 video output support (4K 260Hz)
  • HDMI audio output support
  • 1x Type-A USB 3.0
  • 1x HOST USB 2.0 (Type-A)
  • 1x Type-C OTG USB 2.0 (Input power supply compatible)
  • 1x HOST USB 2.0 (2.54mm Pin Header)
  • GPIO1: Raspberry Pi compatible 40-Pin GPIO
  • M50-4302045 Female Connector
  • 2x I2C 2V
  • 1x SPDIF_TX
  • 1x SPI/UART 3V
  • 2x PCIe
  • 8 GPIOs 3V
  • 1x PWM / Power Key
  • GPIO2: 8-channel 1.8V I2S
  • GPIO3: 15000000bps / 3V Level / Debug UART
  • 1x USB 2.0
  • 1x Green LED (GPIO Controlled)
  • 1x Red LED (Power Indicator)
  • 2.54mm Pitch 2-Pin Through-Hole RTC Battery Pad
  • Compatible with DC 5V/3A power input
  • Operating Temperature: -20℃ to 70℃
  • eMMC module is required for NanoPi NEO4 if you want to use Android 8.1
  • Supports 3rd Armbian, 64-bit FriendlyDesktop 18.04, 64-bit FriendlyCore 18.04, 32-Bit Lubuntu 16.04
  • Supports U-boot-2014.10 and Linux-4.4-LTS Kernel Versions
  • NanoPi NEO4 microcontroller features the 8-layered board
  • Weight: 30.25 grams
  • Dimensions: 60mm x 45mm / 6cm x 4.5cm

Description

NanoPi NEO4 has an eMMC socket but there is no eMMC module. You if you want to boot NanoPi NEO4, you can either use the external eMMC module or opt for a TF Card. NanoPi NEO4 support works with Lubuntu, UbuntuCore, Ubuntu Desktop, and Lubuntu Desktop. If you are working on applications involving AI, robots, deep leaning, industrial cameras, machine learning, advertisement machines, industrial controls, blockchain, or game machines, then NanoPi NEO4 is a considerable option based on its hardware and software specs.